Crane Engineering

Tower Crane Tie-In Force Vector Resolver for Oblique Anchorage Angles Calculator

Tower Crane Tie-In Force Vector Resolver for Oblique Anchorage Angles engineering calculator.

Quick Answer

Calculate Tower Crane Tie-In Force Vector Resolver for Oblique Anchorage Angles

Calculator

Tie-In Force Vector Magnitude (N)
—

Result Interpretation

Tower Crane Tie-In Force Vector Resolver for Oblique Anchorage Angles Calculator computes Tie-In Force Vector Magnitude in N using the defined engineering formula and the input values provided.

Worked Example

Verified calculation

Given:

  • Vertical Distance from Tie to Next Restraint = 12
  • Tie Rod Angle from Horizontal (radians) = 0.785398
  • Overturning Moment at Tie Level = 125000
  • Horizontal Load Component at Tie Level = 45000

Expected Result:

  • Tie-In Force Vector Magnitude = 65322.374698789

Engineering Interpretation:

Under the given input conditions, the calculated result is: Tie-In Force Vector Magnitude = 65322.374698789 N.

The actual numerical result is computed by the Runtime engine using the persisted tool definition. The values shown here come from automatically validated test cases.

Formula / Method

tie-in force vector magnitude = sqrt(pow(overturning moment at tie level / (vertical distance from tie to next restraint * sin(radians)), 2) + pow(horizontal load component at tie level / cos(radians), 2))

Formula family: formula_crane_tower_crane_tie_in_force_vector_resolver_for_oblique_anchorage_angles

Variables

SymbolLabelRoleDescription
overturning_moment Overturning Moment at Tie Level INPUT Overturning Moment at Tie Level
crane_load_horizontal Horizontal Load Component at Tie Level INPUT Horizontal Load Component at Tie Level
mast_height Vertical Distance from Tie to Next Restraint INPUT Vertical Distance from Tie to Next Restraint
tie_angle_rad Tie Rod Angle from Horizontal (radians) INPUT Tie Rod Angle from Horizontal (radians)
tie_in_force_vector Tie-In Force Vector Magnitude OUTPUT Tie-In Force Vector Magnitude

Calculation Steps

  1. Enter the overturning moment at tie level in N·m.
  2. Enter the horizontal load component at tie level in N.
  3. Enter the vertical distance from tie to next restraint in m.
  4. Enter the tie rod angle from horizontal (radians) in rad.
  5. Step 1: Compute tie-in force vector magnitude.
  6. Read the tie-in force vector magnitude (N) from the results.

Engineering Summary

Calculate Tower Crane Tie-In Force Vector Resolver for Oblique Anchorage Angles

Frequently Asked Questions

What does this calculator calculate?

The Tower Crane Tie-In Force Vector Resolver for Oblique Anchorage Angles Calculator estimates Tie-In Force Vector Magnitude based on the input parameters you provide

Why is overturning moment at tie level important in this calculation?

overturning moment at tie level is directly proportional to tie-in force vector magnitude. When you enter overturning moment at tie level in N·m, the calculator uses it in the engineering formula to compute the output

How should I interpret the result tie-in force vector magnitude?

The calculator outputs tie-in force vector magnitude in N. For larger forces, you can divide by 1000 to express the result in kN. The result is computed directly from the input values using the defined engineering formula

What units should I use for the inputs?

Enter each value in the units shown next to the input field: Overturning Moment at Tie Level (N·m), Horizontal Load Component at Tie Level (N), Vertical Distance from Tie to Next Restraint (m), Tie Rod Angle from Horizontal (radians) (rad). Make sure all inputs use the specified units for consistent results

What assumptions does this calculator use?

This calculator uses automatically validated engineering formulas. Results are approximate and should be validated against site-specific conditions, applicable codes, and professional engineering judgment

Related Tools

Browse More Tools

Explore the full index of engineering calculators on this vertical site.